- Updated Version: Used as small heat Iron with PUFF of STEAM horizontally. Ironing: get ready to remove all wrinkles efficiently. PUFF OF STEAM INSTEAD OF CONTINUOUS STEAM produced on each press, which is better for ironing the wrinkle on your clothes.
- How To Use: Fill the tank with clean water through measuring cup (lower than the MAX line). Place it on safety base (if brush installed, just put it on ironing board or table) and adjust the temperature button to the Max and then plug it to socket, you’ll see the working light turn red. After the working light turns off, you can adjust the temperature to what you want (three settings) to do the ironing. If steam needed, you could press the steamer button to get it work at this time.
- Multi-Function: Keep the temperature button at Max position for steam ironing. Please note that it is normal that the indicator light will go on after a while, it means it is heating up; when the temperature comes to a summit, the light will naturally goes off. Ceramic soleplate, 1min heating up, prevents clothes from damaged. In addition, powerful puffs of steam could help remove wrinkle and smell from garments, linens, curtains, upholstery as well as most delicate fabrics.
- Suitable For Most Fabrics: This hand-held fabric steamer iron is suitable for most material of clothes: temperature button “…” for Cotton, linen; “..” for woolen; “.” for silk, nylon and chiffon. 5 steaming holes penetrate the clothes quickly and deeply with powerful steam and finally turn your clothes from crumpled to fantastic quickly.
- Tips: Firstly, please don’t add the water over the Max line, or it will leak. After the ironing work is completed, make the tank dry. Secondly, when you first use the steam, if it was not jiffy steam, maybe the air has blocked the tank, so you need to press it quickly exhausts the air. Thirdly, if you have any operating problems, Please leave a message. we will reply you and offer a good solution for you as soon as possible.
How to use:
1. Directly put your clothes flat on ironing board or even on the table, then you need to add the water in the tank, not more than the max line or it will leak or spoil when you ironing. Secondly, adjust the temperature button to the Max, then the working light turn red. After the working light turns off, you can adjust the temperature to what you want (three temperature settings) to do the ironing.
2. If steam needed, you could press the steamer button to get it work at this time. (Keep the temperature adjustment button at Max position for steam ironing). Please note that it is normal that the indicator light will go on after a while, it means it is heating up; when the temperature comes to a summit, the light will naturally go off.
Rated Voltage:110V ONLY
Rated Power: 50HZ
Water Tank: 100ml
Power cord: 4.6Ft
Product Size: 33x8x7.5cm
1*Hand-held Steamer Iron
1) Please read the instructions carefully before using the steamer iron.
2) Never fill the water tank with chemical substances.
3) Before refilling with water, ALWAYS pull out the plug and also turn the temperature adjustment to OFF position.
4) Do not press the steam button when red indicator light is still up, otherwise, water will be leaking.
5) Turn the temperature adjustment button into Max position for steam iron .No steam come out in other position.
6) Don’t turn over the iron when jet, or the water will leak out from the exhaust port. After finished it, please make the water tank dry.