DEALS
CATEGORIES
USA
UNITED KINGDOM
EUROPE
CANADA
Feature:
- SERVICE GUARANTEE: 30 days money back and 1 year free replacement warranty.
- INSTRUCTIONS FOR USE: The headlight restoration polishing clean kit is intended to restore 2 headlights .It Can remove Scratches ,Yellow ,Oxidation,Haze of headlight lenses.
- CAN BE USE ON: Car headlight restores, plexiglass and plastic surfaces,such as tail lights,trailers,boat windows,helmet snowmobiles and more.
- 3 EASY STEPS TO RESTORE HEADLAMP (Two ways for choose :Manual or Machine) : Sand-Polish-UV Protection .
- HEADLIGHT LENSES WILL BE MORE BRIGHTER: Not only headlamp can become more brighter at night but also can improve safety.
Size:Headlight Restoration Kit
Package includes :
· 2x P800 Sanding Discs
· 2x P1200 Sanding Discs
· 2x P2000 Sanding Discs
· 1x Orange Sponge Discs
· 2x 40gm Polish Paste
· 2x 3.0ml Protect liquid
· 1x Mask tape (300*2cm)
· 1x Backer pad M10 thread
· 1x Adapter
· 1x White Sponge Disc
How To Use :
Prepare :Clean the headlight lens with water.Mast off the area surrounding the lens to avoid scratches on nearby painted surfaces
1. SAND
Wet the sanding disc and attach it to the backer pad .Sand with three different grits to completely remove the heavy yellowing ,fading ,and corrosion .
Note:Use the sanding discs from coarse the fine:P800->P1200->P2000.Not doing so will result in restoration failure.
2. POLISH
Attach the orange sponge disc to the backer pad and apply the polish paste .Polish the lens until shine is restored to its original condition .
Note:For best results, use an electric buffer or polisher .If polishing by hand ,polish with no less than 200 circular strokes clockwise .
3. UV PROTECTION
Clean the headlight lens and make sure the lens is dry before continuing this step.Make sure the headlight is not under direct sunlight (VERY IMPORTANT).Using the white sponge disc provided liquid on the surface of the lens.Allow the protective liquid to sit and dry for 15 minutes .
Then ,allow protective to cure in direct sunlight for 1-2 hours .
After step 3,keep the lens dry and do not allow it to be exposed to moisture .Do not wash the car 24 hours.
