- 【Instant and Accurate Measurement】 1 second response time to have an accuracy range of ±0.2°C (±0.4°F), good for households with kids
- 【Consistency and Auto Shut-off】 20 readings memory recall for keeping track of body temperature fluctuations; Auto shut off without operation in 30 seconds to save up energy
- 【4 in 1 Measuring Modes】 Ear and forehead mode for measuring body temperature, object and ambient mode for milk, water, food and room temperature measuring
- 【Ease of Use and Comfort】 Fast, painless and silent to minimize the risk of waking the sleeping patient, fever alarm if body temperature is detected above 38°C; Easy to read backlit display – a must have for anyone taking a child’s temperature in the dark
- 【Safety and Hygiene】 CE/FDA/RoHS certified, ideal for children and the whole family; Backed with 15 months worry-free warranty and 24/7 professional customer service
Ear Mode: pull off the probe cover, insert it into ear canal(do not push too hard or it may hurt your ear drum), press “START” button to get your reading
Forehead Mode: put on the probe cover, make sure the thermometer completely touches your skin, scan from left to right, press “START” button all the time when scanning to get your reading
Due to the fact that an ear temperature is 0.5°F (0.3°C) to 1°F (0.6°C) higher than an oral temperature while a forehead scanner is usually 0.5°F (0.3°C) to 1°F (0.6°C) lower than an oral temperature, forehead readings always be different from ear readings.
►We strongly recommend you to take ear temperature if you want a relatively accurate reading.
►Temperature of carotid triangle is more accurate than forehead’s, put the probe cover on and firmly(but gently) touch the skin of carotid triangle to take your readings.
Object Mode: point the probe at water/milk bottle/food, keep the probe 3-5mm away from the object, press “START” key to get your reading
Ambient Mode: for measuring environmental temperature
Mute Mode: press the “MEM” button to memory mode, then press and hold the “MEM” button again until you hear a short beep indicating turned off the sound
Fever Alarm: normal temperature = LCD display green, fever = LCD display red with exact temperature and a “beep” signal
① Under shutdown state, press and hold “MEM” button for 6 seconds until LCD displays “°C” then release.
② By pressing “MEM” again you can shift between °C and °F. After you have chosen the right mode, wait for 3 seconds and it will power off automatically, ready for new testing.