Feature:
- 【Three Working Mode】1, Dim Light Sensor Mode; 2, Sensor Mode(Recommend); 3, Constant Medium Bright. -To save energy, outdoor solar lights have a built-in photocell sensor so the light will turn off during the daytime. And it will turn on in weak light mode at night automatically, when people get close to around 10-26ft, it will switch to high light mode.
- 【Long Time Working and Most Popular】- On sunny days,it only takes about 6~8 hours to be fully charged. Low-light lighting on rainy days without sunlight can last for 2 days. Superior to most solar motion sensor light on the market.
- 【360°Adjustable 】- Solar Motion Sensor Light Outdoor Holder Can be Rotated 360°, The Solar Panel has adjustable angles, so you can get full range of lighting. Please install the Solar Lights to face the south and to make sure the Solar panel can get good sunlight.
- 【Motion Sensor Light】Build-in PIR motion detection sensor, this solar lights can detect up to 10-26ft away and range 120 degree, turn on high-bright lighting mode for 20s.After the motion is detected then it will turn to DIM mode. Perfect for garden yard lawn patio garage porch driveway landscape security. Make our life more convenient.
- 【Portable and Easy to Install】The solar light is pretty easy to be installed. Step 1: Drill a hole about 0.02ft on the positon of the scew hole. Step 2: Drive the rubber plug into the bottom hole and firmly secure the bracket with the supplied screws.
1. Solar Panel: 6V/2. 5W .
2. Battery: Li-ion 1860 3.7V/2600mAh (A grade )
3. LED: 10pcs 0.5w Epistar SMD2835 LED
4. luminous flux: 500Lumen .
5. Output Power: 5 Watt under full charged with 42V
Feature:
1. Charging during the daytime automatically, close light. Light up automatically when it dark. Please use the installation kit to mount on the wall or other suitable place with sunlight.
2.When installing at the first time, press the switch on the back of light and cover the solar panel to turn on the light. It come to the first lighting mode automactically after lighting up.
3. After instalation and turn on the light, the working mode as below:
a) After turning on the light, come to the first lighting mode: Super Bright when induction of moving, postpone 20 seconds then turn to Dim Bright status.
b) Press the Switch one time, come to second lighting mode, Super Bright when induction of moving, postpone 20 seconds then turn to off light status.
c) Press the Switch again, come to the third lighting mode, constant Medium Br ight.
d) Press the Switch with third time, turn to off light status directly.
4. The light will be charged fully within 6-8 hours when meet with sunny day, It is high sensitive with the PIR motion sensor. It light up continually when induction of moving, the product turn to power saving mode when without induction.
Notice:
1. As the light was solar powered, propose use working Mode 3 for energy saving, if necessory, use the working Mode 2.
2. Lifetime is over 5 years for battery, no need to change battery. Forbid to throwing the battery into the fire to avoid exploding.
3.Please keep clear on the solar panel as it was charged by it. Propose clean the solar panel per 2 months.
4.Turn off the power to ensure enough eletricity when do not use for long time.
Package Include
1× Solar Sensor Light